All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".

Kit Contents:
Qty Part# Description
1x 013414 Front Box Kit
1x 013459 2020-2022 F250/F350 4.5" Rear Block Kit
1x 123251 Radius Arm Box Kit
1x 123613 2017-2022 Super Duty Coil-over Mount Kit
2x 98224700 Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1
2x 98224718 Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1
1x 88406149 Kit: BDS 05-20 Ford F250/F350 Front Coil
1x 123261 2020-2022 F250/350 2.5in Front Box Kit

Important Kit Notes

• Fits Diesel models only.
• Ford recommends replacement of the pitman arm nut after each time it has been removed.
• If installed on a truck with a top mounted overload spring, with an overload spacer block taller than 1-1/8" UBT4027 (Qty: 4) are required.
• Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
• If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
• Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
• Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section.
• Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
• Installation requires a torque wrench capable of 405 ft-lbs.
• Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends to have this performed prior to installing the lift.

*This kit is sold for offroad use only. Please check you local and state laws before use.